HDFURY

3DFURY Specs




  • Add HDMI 2D and 3D to ANY TV, Monitor, Proj (even 60hz TV !)
  • Display HDMI 2D and 3D content on Digital and/or Analog display
  • 3Dfury can output in both Digital and Analog Video/Audio simultaneously !
    Therefor acting as an advanced digital/analog splitter.
  • Double and Triple frame 1080p24 material up to 1080p72
  • 3D mode output up to 720p144
  • Dual projectors setup using two 3Dfury modules and passive glasses.
  • Up to 720p240 in dual projectors setup !
  • 7.1 Dolby® True HD & DTS Master Audio
  •  Input: HDMI 1.4 (HDCP compliant) input with 3D and Deep Colour support
  • Output: Digital HDMI / DVI-D and/or Component (YPbPr/YCbCr) and VGA (RGBHV) video output
  • Advanced SimulView support (through Glasses and Emitter or through Stream Control)
  • All modes autodetected if possible, otherwise can be forced via button
  • 3-pin mini-DIN Sync Out (for optional emitter)
  • Dynamically create EDID based on Sink EDID parameters
  • Customisation settings available through DIP SWITCH and buttons
  • Perfectly and automatically center image in all standard NTSC/PAL component modes
  • Manually adjust horizontal screen position in all NTSC/PAL RGBHV modes
  • Performs Colour Depth Upscaling in all modes (ON/OFF user selectable)
  • Horizontal and Vertical Sync Polarity Inverter included
  • Automatic SD/HD color-space selection
  • Accept third party accessories on its output
  • Improved output cable driver for driving long cable runs (40-50′)
  • Software/Firmware upgradeable through USB
  • Sound output:
    • Analog and Digital Optical (S/PDIF 5.1 Dolby/DTS) through an innovative 3.5mm combo jack and 7.1 DTS-MA & Dolby True HD via HDMI output
    • HDMI audio passthrough

3Dfury Input/Output mode:

  • 2D VIDEO MODE COMPATIBILITY:
    • NTSC 480i/p, PAL 576i/p, HDTV 720p/1080i/1080p
  • 2D OUTPUT:
    • 2D movies: 1080p24, 1080p48, 1080p72 (3Dfury can double and triple frame from 24hz material)
    • 720p60, 720p120 (double frame from 720p60)
    • Passthrough any resolution
  • 3D MODES INPUT COMPATIBILITY:
    • Full 3D HD 1080 (per HDMI) (Blu-ray): 1920 x 2205 24Hz
    • Full 3D HD 720 (per HDMI) (Blu-ray): 1280 x 1470 60Hz
    • Top/Bottom 1080p 24Hz: 1920 x 1080
    • Top/Bottom 1080p 25Hz: 1920 x 1080
    • Top/Bottom 1080p 30Hz: 1920 x 1080
    • Top/Bottom 1080p 50Hz: 1920 x 1080
    • Top/Bottom 1080p 60Hz: 1920 x 1080
    • Top/Bottom 1080i 50Hz: 1920 x 1080
    • Top/Bottom 1080i 60Hz: 1920 x 1080
    • Top/Bottom 720p 30Hz: 1280 x 720
    • Top/Bottom 720p 50Hz: 1280 x 720
    • Top/Bottom 720p 60Hz: 1280 x 720
    • Side-by-Side 1080p 24Hz: 1920 x 1080
    • Side-by-Side 1080p 30Hz: 1920 x 1080
    • Side-by-Side 1080p 50Hz: 1920 x 1080
    • Side-by-Side 1080p 60Hz: 1920 x 1080
    • Side-by-Side 1080i 50Hz: 1920 x 1080
    • Side-by-Side 1080i 60Hz: 1920 x 1080
    • Side-by-Side 720p 50Hz: 1280 x 720
    • Side-by-Side 720p 60Hz: 1280 x 720
    • Frame packed 720p 30Hz: 1280 x 720
    • Frame packed 720p 50Hz: 1280 x 720
    • Frame packed 720p 60Hz: 1280 x 720
    • Frame packed 1080p 24Hz: 1920 x 1080
    • Frame packed 1080p 25Hz: 1920 x 1080
    • Frame packed 1080p 30Hz: 1920 x 1080
  • 3D OUTPUT:
    • 720p60, 720p72, 720p96, 720p120, 720p144 Frame Sequential
    • 720p and/or 1080p for 60hz display
    • 1080p60, 1080p72

3Dfury Specifications:

  • Input: 1 x HDMI v1.4 (DVI 1.0 compatible)
  • 12-bit deep color HDMI native support
  • Output: Digital HDMI / DVI-D and/or VGA FEMALE output connector, 10 bit analog resolution.
  • HDCP supported (Integrated HDCP decipher engine, Pre-programmed HDCP key)
  • Horizontal shift capability for RGB output mode
    • Enabled with a dip-switch, applied with push-buttons
  • Output horizontal and vertical sync polarity selector for RGB modes (dip switch)
  • Digital Output format: Either HDMI or DVI-D
  • Analog Output format: Either RGB or YPbPr, dip-switch selectable
    • YPbPr requires VGA->3RCA breakout cable
  • All HD/SDTV formats from 1080p down to 480i, NTSC and PAL
    • Including 1080p @ 72Hz PAL and NTSC (for RGB output only)
    • Including 1080p @ 24Hz PAL and NTSC
  • 11-bit 225MHz DAC processing (for true 10-bit analog output)
  • Two separate Internal EDID EEPROM with complete CEA861 extension block
  • Dip-switch selectable
    • One EDID supports all formats
    • The other EDID is up to 1080i, and no 24Hz support (by default, reprogrammable)
  • Automatic Input Format Detection: Digital YCbCr and RGB
  • Full BTB and WTW support in YPbPb output
  • Automatically switches color-spaces for both HDTV and SDTV
  • Precise black levels – no black crush in any standard mode
  • Dual purpose audio output connector
    • SPDIF digital output for 5.1 Dolby/DTS
    • Analog L/R 2-channel stereo
  • Industry-Standard Compliance
    • HDMI 1.4
    • EIA/CEA-861E
    • DVI 1.0
    • HDCP 1.1
  • Digital Video Input / Output
    • Dual integrated HDMI 1.4 cores
    • Supports DTV resolutions up to 1080p @ 72Hz or 720p/1080i @ 120Hz with 36-bit color depth.
    • Flexible digital video interface:- 24/30/36-bit RGB/YCbCr 4:4:4- 16/20/24-bit YCbCr 4:2:2- 8/10/12-bit YCbCr 4:2:2 (ITU-R BT.656)
  • Integrated RGB Color Space Converter for both RGB-to-YCbCr and YCbCr-to-RGB (both 601 and 709) with true 12-bit accurate data using 14-bit processing
  • 4:2:2 <> 4:4:4 converter with 12-bit accurate data using 14-bit processing
  • Digital Audio Output
    • HDMI audio passthrough
    • Industry-standard S/PDIF output
    • Supports 2-channel 32-192kHz stereo audio
    • Supports IEC60958 2-channel PCM
    • Capable of passing IEC61937 compressed audio (5.1 Dolby® Digital, DTS, etc.)
    • 7.1 Dolby® True HD & DTS Master Audio
  • Optional Accesories:
    • DLP-Link 3D Glasses for DLP 3D Ready 120hz Projectors/TV’s
    • External 60/120hz 3D Glasses with emitter for all other displays (ie. 60Hz non 3D Ready Projectors or TV’s)
    • Passive glasses for Dual projectors setup.
    • 3Dfury Glasses with emitter (60/144hz) : All controls like Duty cycle, Delay, Invert, Presets are on the glasses itself, you can stay on the couch and tune up everything till perfection.

3Dfury RF Emitter Specifications:

  • RF Emitter with standard 3-pin mini-DIN
  • Work with up to 8 RF Glasses

3Dfury RF Glasses Specifications:

  • Most Advanced 3D Glasses
  • Interference Immunity
  • Work with all 3DTVs
  • Work with all non-3DTVs powered by 3Dfury
  • Settings are applied directly on the glasses.
  • Control Delay directly on the glasses.
  • Control Duty Cycle directly on the glasses.
  • Invert button directly on the glasses.
  • Loaded with presets selectable on the glasses.
  • Full Sharpness and Brightness control.
  • Mini USB connector for Battery (60+ hours)
  • IEEE 802.15.4 (ZigBee radio) Technology
  • Microsecond accuracy
  • Eliminate Ghosting
  • 1 Year Warranty
  • Frequency 900 Mhz
  • Power consumption 3mA
  • 130mA Battery, working time around 40-43 hours
  • Operational Distance 7-8 meters